lakeleft.blogg.se - Flux brace trailer

Some builders like to mount them on the front as well. You mount two of them on the back part of your trailer.

These stabilizer jacks are not a required undercarriage trailer part, but they are a nice feature.

A chain hook is required on safety chains in many states now so you might as well get them on if you are in a state that does not require them.

Some people actually bolt or weld them on.

You can use these quick links on your chain to easily attach them to the trailer tongue.

Also, if you get pulled over and don't have safety chains you'll get a nice big ticket. These are an important feature that will keep your trailer from coming off the tow incase you make a mistake or it comes loose. This is important because without it you can't attach your trailer to the tow. It's can be welded or bolted to your trailer tongue.

A spring seat is welded to the axle and is placed between the axle and the spring.

If your trailer is a single axle spring shackles are used with a double eye rear hanger. 25 inch wall you can make a they can also be made from 3/16” – ¼” wall.

If you need them right away and you have some square tubing laying around that is 3/16 inch and. You'll also need a spring shackle for the rear portion of your trailer, as well as a shackle hanger for each side.This is a weldon spring hanger but you can get bolt-on spring hangers with a bolt. Plate and Ubolts for each side or our trailer.You can buy springs which have different weight parameters. In this picture we have two 1100 pound double eye springs. We ordered a double eye spring for our trailer build but you can also use a slipper spring.You can buy straight ones and you can also get 4 inch drop axles that are 2000 pounds or below.

3500 pound 4 inch drop axle: This axle can handle up to 3500 pounds of weight.Since you may purchase parts from another supplier your parts will look different but they will work the same way.